FBOHRR688 Mopar Computerized Ignition Systems, Lane-Choice Ignition Kits & Pertronix Distributors
Digital Micro Processor Circuitry, EPROM Processor with Built in DEAD STOP Algorithm REV Limiterall designed and engineered IN HOUSE and Proudly Made In USA!
Eliminates Ballast Resistor, 44KV Outputon demand, Plug and Play, one simple wiring modification (Eliminate Ballast Resistor,Kit Included), stock mounting, ExternalAlgorithm Dial Type POSITIVE STOP REV Limiter, 6061 billet aluminum CnC machinedcase, will not retardtiming or drop output to: 7,000RPM.
The HRR688 Ignition can be quicklyand easily wired to any Ford, AMC or any applications that use a standard4 wire hook up and Magnetic Pick-up type distributor.
2022 Special- Upgrade yourignition system to our HRR688 Ignition Box and Coil Kit and recieve a free email copy of our Tuning to Win book.
from Date of Purchase. Fully transferable.
Pricing in effectuntil 12/30/20 unless otherwise noted. Prices are subject tochange without notice.
DO NOT useany MSD Blaster, Accell or parts store Coil, they are incorrect for theMicro-Processor Type FBOIgnition Box and will not perform correctly and will damage the ECU.The Processor has been programmed to maximize output to the 40011 coil. Noother coil that we have tested will perform as well as the Pertronix40011. The processor program is burned to match that coil. (We burnour programming to the processor in house)
These Boxes CANNOT be tested by any ECU testingequipmentat any Auto Parts or repair facility and may cause permanent damage tointernal electronic components.
There are NO Transistors to test in this box.
Best In Industry Warranty!
5 Years on ECU
HRR688 Ignition Box
44KV & 7,000 RPM
We offer theLongest- 5 YEARS- Warranty of any manufacturer in the performance industry becausewe can!
5 YEAR WARRANTY
No claims ofmagical, imaginary or falsified so called test results.
ModernElectronics andengineering using the most modern components available and
Engineered,Designed
Assembled MADE THE USA
HRR688 ModuleOnly $269.00
NO Ballast Resistor Used
The weak link is gone!
Plug and play to any inductive ignitionsystem....
Mopar-Ford-AMC-IH-Nissan MSD Daytona and many others.
Wiring Diagram supplied or on line in our tech section.
REV Limiter starts at 0=5200
Each click is 200 RPM Increase
9=7000 RPM
The HRR688 Box has a superior Algorithm type revlimiter, it does not cut every other pulse which can damage theengine, or use a rheostat to drop voltage it uses a preprogrammed pattern to give the engine a smoothREV limiter that won't stress the internal engine components.
Our distributor machines have been re-geared to spin 8,800 CrankShaft RPM for testing any and all ignition systems. Beware ofbogus and unsubstantiated claims on the "Internet"
Start sensor technology, the program changes the dwell time to thecoil under 500 RPM cranking speed and increases output by 30-50% forquicker cleaner starts.
Red LED Status light performs a self diagnostictest and illuminates solid red in less than 1/2 secondIndicating system OK.
During crank it flashes with each signalgenerated by the magnetic trigger. Appears solid when engine isrunning as the naked eye cannot distinguish the rapid flash.
FACT: Any Inductive ignition system has a limitation bydesign to run to a maximum of 7,000 RPM. No matter what youread from the Marketing Dept. on the internet, after 7000 RPM an Inductive ignitionwill not run efficiently and you will need aCD Ignition system which isdesigned to run at 7000 RPM and higher.
These Boxes CANNOT be tested by any ECU testing unitat any Auto Parts Store or repair facility and may cause permanent damage tointernal electronic components or Micro Processor.
There are NO antiquated transistors to test in this box. If theLED light works as designed, it's not an ECU Issue.
HRR688 Ignition BoxW/Coil
$307.00 ECU WITH COIL, BallastJumper, Built in REV Limiter, Free Priority Mail 3 Day Shipping
Canadian Customers$40.00 shipping Priority International shipping
HRR688 Module Only *$269.00
Remove the ballast resistor,solder and heat shrink the wires together. Or just use thesimple Ballast Jumper included with every HRR688 Kit to bypass.
This is a Plug & Playunit, mounts in standard ECU holes and plugs into Mopar Harness.Must be used with FBO HRR Coil (Pertronix 40011). Extended use of a coil witha non-compatible Primary resistance and not designed to run on a 12Vsystem may cause the box, coil or both to fail.
Adjustable REV limiter5200 to 7000 (10-200 RPM Increments)
Inductive ignition systems reach thereHigh Limit at 7000. After that you should consider a CD ignition like theCD1 or CD-Pro fromDaytona-Sensors which we have in stock.
DO NOT USE BLASTER, Accell,E-core or Mallory COILS!
Correct and matching Coil is the Pertronix 40011 available atall FBO dealers or O'Rielly's/Autozone Nationwide.
If your using a Tick Toc Tach VDO conversionplease lets us know and we'll include the Tach feed Diode No Charge.
ECU 5 Year Warranty
Our 5 year warranty applies to Pertronix Coils
HRR688 Module Only $269.00
NO Ballast Resistor Used
The weak link is gone!
Can be wired to any 4 wire inductivedistributor ignition system....
Mopar-Ford-AMC-IH-Nissan and many otherstraight-V-Slant 6 cyl applications.
Wiring Diagram on line in our tech section.
REV Limiter starts at 0=5200
Each click is 200 RPM Increase.
9=7000 RPM
Red LED Status light performs a self diagnostictest and illuminates in less than 1/2 second with a red OKIndicator.
During crank it flashes with each signalgenerated by the magnetic trigger. Appears solid when engine isrunning. Also lights up solid red when key is in run position.
HRR686 kit for 6cyl engines$307.00
Includes Coil and Jumper Kit
FBO HRR688Ignition Boxes Warranted for 5 Years
Slant 6 is a special order only.HRR686 Module Only $269.00
HRR688 Ignition Box
With Pertronix Black Coil
Part # HRR688C
Chrome coil available as special order.... Add $10.00
Ebay Prices are higher to cover eBay Fee's
Pertronix Coil Number 40011
FBO HRR688 Ignition Boxes
5 Year Warranty
Coils 30 Month Pertronix Warranty
HRR688 Module Only $269.00
ECU with REV Limiter, Coil &Ballast Jumper Kit $307.00
Add Limiter Plate and Spring Kit for $61.00
FBO HRR Coil Only
Pertronix Part # 40001 Chrome Coil
Pertronix Part# 40011 Black Coil
The HRR/Pertronix Coil 40011 will optimizeoutput and reliability at a 6-16V. Use of any alternativecoil only in emergency situations.
Pertronix 40011 or Chrome 40001 is the correct replacementCoil
Black Coil Pricing:
Black $50.00
Chrome$55.00
Chrome coil brackets $15.00
With or without vacuum AdvanceDistributor
HRR688D Upgrade Kit
With Distributor
Includes:
HRR688 ECU w/Rev Limiter
FBO/Pertronix Coil, Ballast Jumper
New BilletDistributor with orwithout Vacuum Advance
CustomCurved & Phased, AllMechanical or with Vacuum set-up with limiters to match your cam, compression,Manifold Vacuum anddriveline
Tan or Black Cap included-Tan Female or Black Male pin type terminals, specify when ordering.
Older Hemi Engines
Call for quote
Full Kit Warranted for 5 Years
HRR688D Kit
413/440/Hemi, RB, SB$699.00
383/400$749.00
Tan Female Cap HD RotorIncluded. Specify for Black Male Cap.
FBO HRR688 Ignition Boxes and Distributors
Warranted for 5 Years
Full Conversion
HRR688DWR
FBO Points Conversion
INCLUDES:
HRR688 ECU w/Rev Limiter
FBO/Pertronix Black Coil
New BilletDistributor
Curved & PhasedVacuum or Mechanical
VR-1 Resto Electronic V/Reg.
Ignition Wiring Harness
Your choice of Cap
HRR688DWR Kit
413/440/Hemi, RB, SB,Custom Curved$759.00
383/400 LD, Custom Curved
$809.00
DIY$689.00
383/400 LD, DIY $739.00
Tan Female Cap HD Rotor specifyfor Black Male Cap
FBO HRR688 Ignition Boxes &Distributors
5Year Warranty
NEW BilletDistributors
Includes
Custom Curved & Phased
With or W/OVacuum Canister
Mechanical & Vacuum advance for cam durationsof 242 or less at 50
Mechanical advance only recommended for cams at 248 or moreat 50
Lock Down, Non Vacuum all Mechanical advance for Race Applications cam with250 Duration at 50 or bigger.
Vacuum or Mechanical? There's several parameters weneed to look at to determine exactly which distributor advance systemyou'll need to optimize your tuning efforts. Let us help youmake that determination.
We also custom build vacuum cans that can read to5" Vacuum for big cam street motors.
FBO Custom Curved Billet Distributoror
New BilletDistributors now available
413-400 & Hemi, all SB273/318/340/360
Custom Curved $395.00
LD 383/400 $445.00
Call for quote on Early Hemi's
Vacuum or Non Vacuum
NEW DIYBilletDistributors
Theseunits are NOT curved or phased
New Billet distributors as delivered from source
These distributors are all box stock and are notassumed to becorrectly set-up for any engine/vehicle combination.
Adjustable Vacuum Can or Non Vacuum
MP (Mallory) style slide adjustableMechanical Advance
Simple to set mechanical advance.... loosen 2screws and use included measurement tools to set mechanical advancelimiters
We're always available for tech support if youneed help.
413/440/Hemi, RB, SB, Poly 318
DIY $305.00
383/400 Low Deck DIY $355.00
Specify Black Pin/Tan Female cap style
Specify with or without Vacuum Advance
Not Sure?.... callfor tech help
Non-Vacuum or Vacuum
With HRR688D Ignition Kit
& Billet Distributor
DIY Kit $600.00
Custom Curved $699.00
All distributors BB and SB Except 383/400 LD
With or Without Vacuum advance
383/400 Add$50.00
NEW Electronic Distributors with the Mallory style Mechanical advancelimiter system.
With ECU
Call for quote on early Hemiengines we'll need CID and year of engine.
Now you have the best distributor, team it up withthe best Ignition Module, don't be fooled by false claims by peoplewho don't even own a distributor machine.
HRR688 Ignition Boxes
$307.00
Free Shipping
5 Year Warranty
Substitute Limiter Plate forthe MSD Pro-Billet Distributor Limiter Bushings ...same price
Limiter Plate full instructions on line.
J685S Instructions on line ClickHere
DIY Performance Package
Tune your distributor -Modernize your Ignition
One of Our BEST SELLERS!
HRR688JS: $379.00
Free Shipping in USA
Shipping outside of the United States calculated when ordering.
Do It Yourself Kit
HRR688DWR DIY Kit
New Billet Distributor
Replaces the stock appearing unit featuring a strongerpick-up coil for better signal, shaft bearings for longer life, MalloryStyle advance limiter system for precise tuning, Tan Cap or black Male to match your wire set, Adjustable Vacuum advance system, hardened andcoated shaft.
Available in Vacuum or Non Vacuum.
5 year warranty on workmanship,Guaranteeing Reliability
For You DIY Guys
The Ultimate UpgradeKit
HRR688Ignition Module with REV Limiter
PerTronix Flamethrower Coil
New Billet Distributor w/Adjustable Mechanicaland Vacuum advance.
Spring Kit
Mallory style adjustable Mechanical Advance
Tan female cap, specify for Black male cap.
Everything you need to achieve the Perfect tune-up!
Best TECH Support in the industry
5Year Warranty fully transferable
Kits for All common Mopar engines273/318/340/383/400/361/413/426 Max Wedge/440, 318 Poly and some EarlyHemi's, all at one price!
Time to say goodbye to your old antiquated 1970'stransistor style ECU and upgrade to something made in this centurywith microprocessor timing control, Algorithm REV Limiter, Zerotiming retard under any load and up to 7000 RPM.
5 Year Warranty...guaranteed dependability and reliability.
The BEST tech support in the industry!
See pricing above for HRR688DWR DIY Kit.
Lets make it run as good as it looks and keep it American Made andkeep it off the Dam Tow Truck.
FBO Points Conversion Kit
#HRR688DWR
DIY .. $689.00
Curved and Phased Readyto Install .. $759.00
--- Updated: 4-15-2022 --- Checking wording stopped Internal Note
DIY KIT - With WiringHarness, Distributor, HRR688 ECU, Pertronix Coil and Voltage Regulator.
5 Year ECU Warranty
Custom Curved & Phased Kit
INCLUDES
*HRR688 W/Rev Limiter
*FBO Pertronix Coil
*Tan Female or Black Male Brass Contact Cap
*New BILLET Distributor with Curve& Phase
*VR-1 Voltage Regulator
*Ignition Wiring Harness
5Year Warranty on FBO ECU
COMPLETEFBO Kit.
Technical Support and nearly double the outputcapabilities of the transistor based ECU.
Vacuum or Mechanicaltype distributor
HRR688DWR
Curved & Phased Complete Points Conversion Kit
$759.00
Black Male orTan Female Cap & HD Rotor Included
Click for large image
Maintain that stockappearance with this ballast resistor bypass Jumper kit
Comes assembled withconnectors installs in 3 Minutes
Must be used with HRR688 Ignition/Pertronix or the wires need to soldered together to deliver fullbattery voltage to ignition coil.
Ballast resistors notincluded
$15.00
Included withall HRR688 Ignition Kits
Call for pricing.
Price good on most GM, Ford and Mopar V8distributors.
Custom Blueprinted Curved andPhased to your engine
WITH Adjustable Vac CanInstalled and Mechanical & Vacuum Limiters Set
Ignitor 3 Coil Included
FBO 5 Year Warranty
FREEShippingto US Mailing Address'
**Factory units do not have the adjustable
Vacuum Canisters
(Blueprint your PTX distributor $145.00)
Ignitor III
Distributor, Plug and Play, HallEffect, Vacuum/Mechanical Advance, Black or Red Cap, Chrysler, 273,318, 340, 360 all RB and LD Big Blocks.
Built in REV Limiter set to your spec's.
Specify socket OE style Cap or Pintype male cap, Red or Black.
Includesphasing and custom curve with our exclusive Advance Plate Machiningprocess to guaranty absolute consistent timing events every time. Nocopper straps floating around inside the distributor.
5 year warranty on our workmanship
30 Month Pertronix Warranty on Module
Box Stock No Coil NLA
Box Stock With Coil NLA
Got One? Full set up with our advance limitermachine work $145.00
NLA-No Longer Available- We are acustom Ignition Shop not a Mail Order House. If your looking for adistributor BluePrinted to your vehicle then call us. Ifmediocrity is you goal call Summit .
Click logo forComplete Mopar Pertronix Distributor Listings
These PerTronix Flame-Thrower plug and play billet distributors withIgnitor III® module offer the latest version of Pertronix's ignitionmodules. They include the patented Ignitor III® electronic ignitionmodule and a CNC-machined 6061 T-6 polished billet housing. TheIgnitor III® features adaptive dwell, which maintains peak energythroughout the entire rpm range, reduces misfires, and improves engineperformance. Peak current level is reached just prior to spark formaximum energy without the heat buildup and increased coil performanceand module reliability. They adjust spark timing at higher rpm tocompensate for the inherent electronic delay, sense startup, anddevelop more energy for quicker, easier starting. The PerTronixFlame-Thrower plug and play billet distributors with Ignitor III®module have a built-in LED for user feedback confirmation of the revlimiter setting.
Orange Box,Mopar performance ECU, Mopar Chrome Box, Mopar Gold Box, Mopar ECU.Re-n-ator, 4120534,RT Garage, 4120505, rev-n-nator, Orange ECU, Moparpoints conversion
These Flame-Thrower spark plug wires from PerTronixgive that "high performance" look to your engine compartment, alongwith true high performance!
All wires are black with black boots,Blue or Red colors available on special order.
Universal sets cap end assembly required
* Low ohm per foot resistance
* Silicon jackets to resist high temperatures, moisture, oil, andchemicals
* EPDM (Ethylene Propylene Diene Monomer) rubber inner insulationfor superior heat resistance and prevention of arcing and voltageleaks
* Fiberglass reinforcing braid for added strength and flexibility
* Made in the USA
* Two current paths for reliability and redundancy
Specify 90*-45* or straight plug ends
90* cap ends
J685S Limiter Plate W/Springs
All Mopar Electronic Distributors
This kit has the drop in disc that will limittotal Mechanical Advance to 0-10-12-14-16-18*
Includes the 6 piece spring kit
$61.00
J685SInfo Click here
J685Instructions on line Click Here
FREE Shipping on this item
J685 Limiter Plate
Click above for more info
Fits All Mopar Style Electronicand Points Distributors
Disc Only, if you candisassemble and reassemble your distributor with our instructions and need to limitthe total mechanical advance.
Shop on EBay J685 Limiter Plate
Just call us $39.00
Direct Oregon sales have no Sales Tax
J685Instructions on line Click Here
Springs and TuningGuide not included...Disc Only
J685SK Limiter Plate with Springs andTuning Guide
All Mopar Electronic Distributors
This kit has the drop in disc that will limittotal Mechanical Advance to 0-10-12-14-16-18*
Includes a spring kit andTuning Guide
$77.00
J685SInfo Click here
J685Instructions are now on line Click Here
FREE Shipping on this item
`
GM Ignition
Ford Ignition
AMC Ignition
GM B28 Vac cans in stock
Mastersof Ignition - Over 100 Years of Combined Experience and TechnicalKnowledge
